Quantcast
Channel: Automotive Repair Manual Download and Reviews » Search Results » oem toyota stereo loc amplifier
Viewing all articles
Browse latest Browse all 10

Ford Focus Amplifier Installation Instruction

0
0

Ford Focus owners who want a more powerful-sounding stereo system can add an aftermarket amplifier to their unit. The amplifier will boost the signal energy of the factory head unit to supply extra readability and volume. You possibly can elect to have the amplifier professionally installed, or you’ll be able to obtain the requisite adapters and install the amplifier yourself. Choose an amplifier that gives a safe level of energy for your manufacturing unit speakers. The tolerance on your speakers might be found within the proprietor’s manual.

Ford Focus Amplifier Installation Instruction

1. Lift the Focus’ hood and loosen the bolts on both of the battery cables’ clamps with a ten-mm socket wrench. Remove the detrimental battery cable from the negative battery terminal post and set it aside.
2. Remove the constructive battery cable and place the ring terminal included within the amplifier wiring kit onto the positive battery terminal. Exchange the constructive cable clamp over the ring terminal on the terminal post. Tighten the bolt on the cable’s clamp with the wrench. Take away the fuse from the ring terminal’s fuse holder.
3. Plug the ability cable (amplifier wiring equipment) into the ring terminal outlet. Feed the facility cable via the Focus’ firewall into the passenger cabin of the Ford. Observe the path established on the best side of the engine compartment into the inside of the vehicle.
4. Slide the Ford DIN removing keys into the holes at either end of the manufacturing facility stereo deck. Push the keys into the stereo till they lock into place. Pull outward on the keys whereas sliding the stereo from the dashboard.
5. Disconnect the two white, plastic stereo wiring connectors from the retailers on the back of the stereo. Plug the connectors into the wiring harness adapter leads. Connect the wiring harness adapter lead connectors to the corresponding retailers on the back of the Ford’s inventory stereo.
6. Plug the patch cables into the wiring harness adapter leads. Discover the diagram in the wiring harness adapter’s guide for proper connection locations.
7. Feed the patch cables via the again of the Ford’s stereo dock to the ground of the vehicle on the passenger’s side. Slide the factory stereo into the Ford’s stereo dock until it locks into place inside the dashboard.
8. Route the patch cables alongside the passenger’s facet of the Focus to the situation of the amplifier. Route the power provide cable from the driver’s facet to the placement of the amplifier. Tuck the cables into the side panelling of the Focus with a trim panel elimination software or flat screwdriver.
9. Insert the ability cable lead into the facility input on the amplifier. Connect the patch cable results in the sign inputs on the amplifier. Join the amplifier to a screw or bolt within the rear cargo area of the Focus with the grounding wire from the amplifier wiring kit.
10. Return to the Ford’s battery. Change unfavorable battery cable clamp onto the detrimental battery terminal and tighten the bolt with the wrench. Substitute the fuse into the ring terminal’s fuse holder slot and close the Focus’ hood.


Viewing all articles
Browse latest Browse all 10

Latest Images

Trending Articles





Latest Images